5G Sub-6 GHz (617 MHz–6 GHz) MIMO Antenna

5G Sub-6 GHz (617 MHz–6 GHz)
MIMO Antenna

Standard

The 5G Sub-6 GHz (617 MHz–6 GHz) MIMO Antenna supports wideband global frequency coverage.

It covers LTE Band 71 (600 MHz) through the upper limit of 5G NR Frequency Range 1 (FR1) at 6 GHz.

Two integrated antennas provide MIMO capability with high isolation, while maintaining a compact size of 131 (L) × 76 (W) × 20 (H) mm.

In the 698 MHz–960 MHz low-band spectrum, it delivers higher Radiation Efficiency than our compact MIMO antenna models.

5G Sub-6 GHz MIMO antenna installation example

5G Sub-6 GHz MIMO antenna housing design

5G Sub-6 GHz MIMO antenna front thumbnail

5G Sub-6 GHz MIMO antenna side thumbnail

5G Sub-6 GHz MIMO antenna installation thumbnail

5G Sub-6 GHz MIMO antenna housing thumbnail

Features

1. Superior Radiation Efficiency in the 698–960 MHz Low Band

This antenna features a larger enclosure than our best-selling Compact MIMO Antenna, enabling improved Radiation Efficiency in the 698–960 MHz low band where wavelengths are longer. By improving low-band performance, it helps expand your network coverage area and enhances service reliability.

2. Worldwide Frequency Coverage

This antenna covers LTE Band 71 (600 MHz) through the upper limit of 5G NR FR1 at 6 GHz, enabling wideband global operation. Although lower frequencies typically require larger antenna structures, this design integrates two antennas with high isolation into a single compact enclosure using advanced engineering techniques. As a result, it achieves a compact size of 131 (L) × 76 (W) × 20 (H) mm.

3. Water and Dust Protection

This antenna is rated IP56 for dust and water protection, supporting reliable indoor and outdoor installations. The enclosure uses weather-resistant polycarbonate (PC) material and operates across a temperature range of -30 °C to +90 °C. The housing meets UL 94 V-0 flammability requirements.

4. Multiple Mounting Options

The antenna housing includes mounting holes for screw fixation and supports adhesive tape installation. An integrated rear magnet enables direct attachment to metal surfaces. The SMA connector supports torque wrench tightening, ensuring secure installation for mission-critical industrial applications.

Applications

IoT and M2M communications, remote monitoring systems, payment terminals, security devices, smart agriculture and cloud-based security systems, and high-throughput data applications such as digital signage and 4K/HD video streaming.

Specifications

Frequency Range	617 MHz–6 GHz
Type	Half-wave Dipole Antenna (No ground plane required)
Gain	≤ 3 dBi
Radiation Pattern	Omnidirectional
Input Impedance	Nominal 50 Ω
Connector	SMA Plug (Standard)
Coaxial Cable Length	1 m / 5 m
Dimensions	131 (L) × 76 (W) × 20 (H) mm
Operating Temperature	-30 °C to 90 °C / PC (UL94 V-0)
Accessories	Integrated rear magnet / 3M automotive-grade acrylic foam double-sided tape included
RoHS Compliance	Compliant with RoHS2 Directive
Ingress Protection	Equivalent to IP56 (SMA connector is not waterproof. Protect with self-fusing tape and vinyl tape.)
Notes	Not intended for high-safety applications requiring exceptional reliability, including aerospace equipment, transportation control systems, power generation control systems (nuclear, thermal, hydroelectric), or life-support medical devices. For ordering, please contact your authorized distributor.